Marlin firmware has long been the industry standard for 3D Printers. It’s reliable, open source and actively maintained, with a massive community of contributors behind it. In order to compile Marlin firmware though, we need to familiarize ourselves with a programming environment.
Most tutorials use VSCode and a PlatformIO plugin, and there’s nothing wrong with that approach, but ambiguous errors are almost guaranteed within Microsoft’s Visual Studio. In this guide, we’ll compile Marlin firmware from the command line, bypassing the extra software and keeping this as simple as possible.
Before we can compile Marlin firmware, we must first install two software packages, Python and PlatformIO.
Python is a high level, general purpose programming language. It comes pre-installed on most operating systems with the exception of Windows.
Our firmware compiler, PlatformIO, is built on top of Python. As such, we’ll download and install the latest version before moving forward.
Launching the Python Windows Installer will bring us to the following screen. Make sure “Add Python 3.9 to PATH” is checked at the bottom, then click Install Now to start the setup.
PlatformIO is a cross-platform, cross-architecture, multi-framework IDE for developing embedded systems. Simply put, you can compile the same code for different devices without much hassle.
Start by creating a new folder on your Windows PC, we’ll call this “platformio”. Download the PlatformIO installer script from the following link, then place this file inside of our new directory.
From the “platformio” folder, click the file bar at the top and type in “cmd”. Press enter and this will open a command prompt in the current directory.
At the command prompt, run the PlatformIO installer script we downloaded by typing “python get-platformio.py” and press enter. This will take around 30 seconds to complete.
With PlatformIO now installed, the last step is to add it to our environmental PATH variable. This allows Windows to recognize the application by name, know where the files are located and run it from anywhere.
Add a new entry to the list for PlatformIO and specify the path where it was installed. This should be “C:\Users\username\.platformio\penv\Scripts”, replacing “username” with your Window’s account name. Press OK to save the changes.
With our prerequisites done, we’ll grab the latest release of Marlin firmware. Either clone the source code from their official Github page, or download the compressed ZIP archive below.
Extracting this archive will create a “Marlin-2.0.x” folder, containing the files we need to compile our firmware.
Keep in mind, the default configurations are just a generic example, it’s not setup to work with any particular 3D Printer. To ensure the firmware runs as expected, we’ll update the configuration files to match our machine in the next step.
Marlin has a massive library of ready made configuration files, supporting hundreds of different 3D Printers. Based on the machine’s original firmware, these are templates that can be used as-is or customized to your preference.
When manufacturers violate the GPL license and don’t publish their modified source code (looking at you Creality), this can be a godsend.
Download and extract this archive. In the ‘config/examples’ directory, we’ll find a list of folders belonging to different manufacturers. There is a collection of sub-folders inside of them, one for each 3D Printer that company has released. In some cases, there is even a third tier of folders for various control boards.
Locate the folder for your 3D Printer and copy all of the files from inside of it. The primary two are Configuration.h and Configuration_adv.h, but most will have a _Bootscreen.h and _Statusscreen.h file as well.
In my case, I have a Creality Ender 3 with a BIGTREETECH SKR Mini E3 2.0 board installed.
Take the files that we’ve copied and place them in the ‘Marlin-2.0.x/Marlin’ folder from the previous step. If files with the same name exist in that directory, overwrite them with the new configurations.
Should you wish to make changes before compiling the firmware, now is the chance to do so. Configuration.h file holds the common settings, and despite the file extension, it can be modified with a standard text editor.
Before we can compile Marlin firmware, we need to know what control board is in our 3D Printer. The firmware itself is hardware agnostic, but when compiling it into a binary file, we’re building it for a specific microcontroller.
The full list of boards can be found in our Marlin firmware folder. Navigate to ‘Marlin-2.0.x/src/core/boards.h’ and open it in a text editor. The board names are defined in all capital letters, one per line, with a comment indicating what 3D Printers use it. Some of the most common options are provided below.
|BOARD_MELZI_CREALITY||Stock Creality board used on the Ender 3, CR10, etc.|
|BOARD_CREALITY_V427||Creality 32 bit silent board used on the Ender 3 V2 and sold standalone.|
|BOARD_BTT_SKR_MINI_E3_V2_0||Creality 32 bit silent board from BIGTREETECH for Ender 3, CR10, etc.|
|BOARD_BTT_SKR_V1_4_TURBO||Universal 32 bit board from BIGTREETECH|
|BOARD_TH3D_EZBOARD||32 bit board from TH3D for Creality and Sovol 3D Printers|
Once we know the board type, we’re set. Move back to the root directory of our ‘Marlin-2.0.x’ folder and open a new command prompt using ‘cmd’. Execute the following command, replacing board_name with the one found in the previous step.
platformio run -e board_name
In my case, I am using a BIGTREETEECH board, where mine is identified as ‘STM32F103RC_btt_maple’.
If everything works as expected, this process will take about 5 minutes to complete. When finished, we should have a confirmation message informing us that the build was a success.
Above the success message, we can see the compiled firmware has been placed inside of the directory ‘Marlin-2.0.x\.pio\build\board_name’. Depending on the board type, this will either be called “firmware.hex” or “firmware.bin”.
Flashing custom firmware on modern boards couldn’t be more simple. If you’ve purchased a board from the BIGTREETECH SKR series, or the latest Creality 4.2.7 for example, follow these 3 steps and you’re done.
When exactly did this become so easy you might ask?
After years of overlooking such an important feature, manufacturers like BTT and Creality have finally started including a bootloader on their 32 bit boards. This is a small program stored in memory which makes it possible to write new firmware.
Better yet, they adopted the Smoothieware bootloader design, capable of loading firmware files right from the SD card. No longer is it necessary to connect the 3D Printer to a PC over USB cable.
Unfortunately most budget printers, the Creality Ender 3 for example, do not come with a bootloader installed. These use a cheap 8-bit Melzi board with the bare minimum functionality. Short of spending $40 for an upgrade, the only way to write custom firmware is to first flash a bootloader.
The good news is, there are several ways to do it, none of which are too difficult. You will however need some specialized tools for the job, and unless these happen to be lying around, that money could be put towards a new 32 bit silent board.
In the guide, we make an ISP (in-system programmer) from an Arduino Uno and some breadboard wires. Both are fairly inexpensive items and common for hobbyists, where this may be an attractive option to some.
Alternatively, we can just purchase an AVR Programmer for less than $10 that is ready to use.USB AVR Programmer - $9.99
Regardless of what method you choose, they should more or less work exactly the same. It’s also worth mentioning, this is a one time task. Once a bootloader has been flashed to the board, it’s permanent, allowing you to write new firmware as many times as needed.
The is a fantastic concept, but a horrible product. It's intended to rival the likes…
Creality 3D Printers are notorious for having a warped heated bed. The Ender 3 and…
After buying yet another Creality 3D Printer last month, it was a disappointing to find…